Tamper Evident Labels: VOID, Anti-Peel & Seals

Home / Tamper Evident Labels: VOID

What "Tamper Evident" Actually Means

A tamper evident label leaves visible proof of interference. Once the label is lifted, the substrate, adhesive or printed layer changes in a way that cannot be reversed: a VOID message appears, the film tears, or the label cannot be reapplied cleanly. The label does not usually stop a determined person from opening the pack. Its job is to make sure the attempt is obvious to the next person in the chain.

This distinction matters at the specification stage. Buyers sometimes ask for a label that "cannot be removed", when what they actually need is a label that records removal. For a structured comparison of these terms, see our guide on tamper evident vs tamper proof vs VOID labels.

VOID Labels: Evidence That Stays Behind

VOID security labels use a release pattern that transfers a "VOID" or custom message onto the surface when the label is peeled. The label itself also shows the corresponding mark, so both the container and the removed label carry evidence. Because the message remains after removal, a resealed pack looks different from an untouched one.

Shenzhen Huaxin Anti-Counterfeiting Technology Co., Ltd. produces VOID labels at US$0.003–0.007 per piece at 100,000+ volume tiers. The company has manufactured security labels in Shenzhen since 2008 and operates a 1,500 m² factory with 60–100 employees, offering more than 60 anti-counterfeiting technologies. Full construction options are listed under VOID security labels.

VOID labels suit cartons, rigid boxes, cosmetic outer packs and electronics packaging, where a flat, clean surface allows the release pattern to transfer reliably.

Anti-Peel and Destructible Constructions

Anti-peel labels take a different approach. The top layer peels away to reveal the information printed on the layer beneath, and a peeled label cannot be reapplied cleanly. This is a reveal construction, and it is often chosen when the label must be difficult to reuse rather than simply show a mark.

The double-layer anti-peel label (DL-01) is built for this requirement. One layer remains on the product and one lifts away, so the pack shows evidence of opening and the label cannot simply be lifted and reapplied intact. Minimum order quantity is 20,000 pieces, with a lead time of 7–14 days. Specifications are listed under double-layer anti-peel labels.

A simple way to choose between the two: if you need a visible message, specify VOID. If you need the label to fall apart on removal, specify a destructible anti-peel construction.

Sealing Labels for Wine and Cigarette Packs

Sealing labels close a pack across a flap, cap or carton edge, and they double as tamper evidence when the seal is broken. Wine and cigarette packs are common applications because the seal crosses an opening that must stay closed until purchase, and because both categories face refilling and repacking risk.

Sealing labels can combine VOID release, destructible face material, serialization and other security features. Options for these formats are described under security sealing labels.

Matching a Construction to Your Pack

The table below summarizes the options. Prices and lead times depend on size, material and feature set, so treat these as starting points for a quotation.

Item	Detail
VOID labels	US$0.003–0.007/pc at 100,000+ volume tiers
Double-layer anti-peel label (DL-01)	MOQ 20,000 pcs; lead time 7–14 days
Sealing labels	For wine and cigarette pack sealing
Manufacturer	Shenzhen Huaxin Anti-Counterfeiting Technology Co., Ltd., Shenzhen, since 2008
Audit	TÜV Rheinland report MIC-ASR262171
Facility	1,500 m²; 60–100 employees
Monthly capacity	510,000–1,000,000 labels
Technology range	60+ anti-counterfeiting technologies

Three practical checks before you request samples: confirm the surface the label will sit on (coated board, glass, film or varnish), confirm whether the pack is opened by tearing or by lifting a flap, and confirm whether the label must survive transport and handling without accidental damage. A tamper evident label that triggers in transit creates complaints rather than protection.

Request a Quote

Send your pack dimensions, substrate, artwork status and expected annual volume, and we will recommend a VOID, anti-peel or sealing construction and confirm pricing and lead time. Start with our contact page, or review the double-layer anti-peel and VOID ranges before you write the brief.

FAQ

How do I choose between VOID and anti-peel labels?

Choose VOID when you need a visible message on both the product and the removed label. Choose a destructible anti-peel construction when the priority is preventing the label from being lifted and reused on another item. Many packs use one construction for the closure and another for the brand panel.

Can tamper evident labels be applied by hand or only by machine?

Both are possible, depending on the construction and label size. VOID labels need consistent pressure to transfer the release pattern cleanly, while destructible labels need care to avoid stretching during application. Share your application method when requesting samples so the construction matches your line.

What information do you need to quote a tamper evident label?

We need the label dimensions, the surface material, the pack opening type, the security features required and the expected order volume. Artwork files and any serialization requirements help us confirm feasibility. Double-layer anti-peel labels start at 20,000 pieces with a 7–14 day lead time.